Blogger Widgets

July 1, 2011

DWR Quilt Along: Yardage & Cutting Instructions

DWR Quilt Along

And so it begins! Today marks the official start of my Double Wedding Ring Quilt along. If you're participating and have a blog, feel free to share the love and post my button! You can grab the code if you look on my right sidebar. A big thanks to my friend Brenda and her computer-whiz boyfriend for putting this button together for me :) And don't forget, if you still need to order a bundle (or other cute fabrics for your stash that have absolutely nothing to do with this quilt along *wink*), you can use the coupon code TPSQAL in her Etsy shop to receive 15% off your order - woot woot!

Now. Down to brass tacks. Hopefully I'm posting this in enough time for you to start on your quilt over the long weekend. I had an incredibly busy week at work and have been scrambling to get everything together at night. Things may change a bit depending on the feedback I receive, but here is my projected schedule for the quilt along as of right now:
*NOTE: Starting at this date, I moved the schedule back a week from what was originally planned.
    The first two steps will be the only ones that are a week apart, after that, it will jump to 2 week intervals because I want to give you (and me) a moderate amount of time to complete each step. It was a marathon finish to end when I made my last Double Wedding Ring, and I definitely don't want to go there again - I was cranky, stressed, and had a stiff neck for days! And nobody wants that, because this quilt along is supposed to be fun fun fun! (until my daddy takes the T-Bird away...)
    On the flip side, don't feel bad if you discover the above schedule is a bit too brisk for your taste. Take your time and enjoy the process- no one has a gun to your head telling you to finish by Sept. 2 or else! Just follow my instructions as you have time, because let's face it, it's not like they're going anywhere once I post them in the endless abyss known as the internet ;)
    To refresh from my last post, here are the yardage requirements for a finished quilt that measures 54.5" x 54.5":
    • Arcs: 1/3 yard of 13 different prints
    • Intersection squares: 1/4 yard of 2 different prints
    • Melons & Center Medallions: 3 yards
    • Binding: 1 yard
    • Backing: 3 1/2 yards
    These dimensions and supplies are based on the original pattern we're using. If you're interested in making a quilt that's a bit larger, there's been some discussion about it here.

    Before I move on to the cutting portion of things, I'd like to say that I waffled back and forth over whether or not I should include this part. I know you all know how to rotary cut your fabric, and I didn't want to seem patronizing. In the end, I decided to include it because the methods I use are pretty efficient, and I hope they can save you some time :)

    Also, I know there are two camps out there when it comes to prewashing, and I'm not trying to rock anyone's world, but I strongly recommend prewashing your fabrics before you embark on this quilting adventure. The piecing is very intricate, and I would hate for you to spend all this time making a beautiful quilt, only for the fabric to warp or bleed the first time you wash it.  I understand everyone has their reasons and preferences, but I think it's better to be safe than sorry in this instance!

    So. Cutting. First of all, you'll need to cut 40 squares each from two different prints for your intersection squares. If you aren't sure what I'm talking about when I say "intersection squares", take a gander at the photo below. I circled the squares in question with a red circle...


    You'll need to cut forty (40) 2.5" x 2.5" squares from each of your two prints. What I did is fold each print in half, selvage to selvage, and cut three 2.5" strips along the width of the fabric. Then I sub-cut each 2.5" strip into the required 2.5" x 2.5" inch pieces.




    Next I moved onto the actual arc pieces. You will need to cut these pieces slightly larger than the intersection squares - the finished size will be 3.5" x 2.5". To complete the quilt top, you will need to cut exactly 37 squares from each of your 13 prints. Not to scare you, but if you purchased 1/3 yards like me, be careful when you cut because you have exactly enough fabric for your squares (with only an inch or two of breathing room).

    The procedure for the arcs is much the same as the intersection squares. Fold your fabric in half, selvage to selvage, and cut three 3.5" strips across the width of the fabric.


    Do not unfold the strips - leave them halved as they are. Place a ruler just below the folded edge and trim. Starting at the straight edge you've just created, make a cut every 2.5". (You don't have to be as anal with this part as you do the following sections, because you'll be trimming the edges off anyway after you finish paper piecing.)


    You should be able to get 16 squares from the first two strips, and 5 from the last. On the last strip you'll only need to make three cuts, which will give you 6 squares - the extra square and remaining strip can go in your scrap pile.


    And voila! Here are my finished arc & intersection squares! Good Folks is my favorite fabric line ever, and I've been hoarding it for a DWR quilt for quite some time! I can't wait to finish it for our new home :) I'm using Kona Buttercup for my background solid.


    Next comes the fun part: tracing your melons and center pieces. I'll be gut level honest and tell you that most of the trouble I had piecing my last DWR came from poorly cut melons and center pieces. Here's the problem - the more you trace and transfer the shape, the more "off" your final cut pieces will be. So here's what I recommend. Trace your melon onto a piece of template plastic, and cut the plastic piece out. Place your original paper version on top of the template plastic one, line them up, and trim off the excess. Be as accurate as possible! Even tiny little 1/16" overhangs can screw you up!


    As for the center piece, I recommend making a template half the size of the one given in the pattern directions. I cut out the quarter piece provided on the directions, lined it up on my template plastic, and traced. Then I flipped the paper over to create a mirror image, and traced the shape again.

    I laid my paper piece over the finished template below so you can get a visual of what I'm talking about. The grid-lined template plastic (purchased in a pack at Joann's) really helps with this step because you can make sure everything is straight before you begin tracing. Again, you'll want to place the paper template over the plastic one and trim once you're finished.


     Now you can start tracing! Along the width of your fabric, fold up a 5.5" piece. Place your center template on the fabric with the bottom edge lining up with the fold. Trace as many centers as you can across the width of the fabric with a water/air dissolving pen and cut (you should be able to get 4 per row). Before I begin cutting, I like to pin the two layers together to keep them from shifting (thereby distorting the shape) while I cut my shapes. Once you finish cutting those 4 centers, trim off all the wonky hanging bits, fold another 5.5" over, and repeat the process until you have 16 center pieces.


     (Sorry for the wonky line...it's late and I couldn't get Elements to cooperate...argh!)



    For the melons, place the plastic template on the fabric and trace 40 of them.


    Just like you did when transferring the template from paper to plastic, line up the plastic template and the fabric piece after cutting. Trim off any excess. As you can see in the photo below, even though I was meticulous with my tracing and cutting, the tip of my melon ended up being about 1/8" too wide.


    Bottom line - the more accurate you are with your tracing and hand-cutting, the more time and frustration you'll save yourself in the end!When I made my DWR last summer, I was going crazy trying to figure out why the fabric was always bunching up in the corners no matter what I did. After ripping my arcs and melons apart about 20 times (not exaggerating), I realized the tips of my melons were too wide, which was causing the fabric to bunch up at the point where the melon and both arcs met. One moment I was ready to burst into tears and give up, and the next a light bulb went off and I was sailing along piecing curves.




    The cutting is fairly straight forward, but if you have any other questions while you're working, feel free to message me and I'll try to help you as much as I can :)

    13 comments:

    1. What kind of long rotary cutter is that?

      ReplyDelete
    2. Bam. Arcs done. Now I've gotta get some of that template plastic for all the curvy pieces...

      ReplyDelete
    3. I was wondering about your cutter, too. Do tell!

      ReplyDelete
    4. This might be a good project to use freezer paper templates. The extra 1/8 inch is from your pen. If you make freezer paper templates, check to be sure they are accurate, iron them on, cut them out, pull off the templates and reuse them, you won't have that problem. Don't know if you already tried them or not. Best of luck on such a huge project!

      ReplyDelete
    5. I had a question about the arcs that we have to cut out - I see that there are 2 lines - dashed and solid. I assume we are cutting on the dashed line - - but once the fabric is sewn on will we cut on the solid line?? I wanted to know if I should cut OUTSIDE the dashed line or right on the dashed line ... does that make sense???

      ReplyDelete
    6. Uh , yeah--- I wanna know about that fancy rotary cutter! :) With all these quilts going lately, oh, I would SOOOO love that- I have a really hard time holding the ruler straight- even with the suction cup handles- HA! And Good folks- now I'm drooling everywhere!! :) Beautimous!!

      ReplyDelete
    7. It's a 24" Fiskars rotary ruler (item #F9519). They discontinued them a couple years ago and I have NO idea why. It's the best tool ever because it's heavy and has a foam strip on the bottom, so your ruler doesn't shift AT ALL when you slide the attached rotary cutter down. They really need to bring them back because people are constantly searching for them on the internet and eBay.

      @Laura #1 - I know a lot of people love that method so I tried using freezer paper a while back, and it just wasn't my thing. Maybe I'll have to give it another whirl :)

      @Laura #2 - You will cut on the solid line. The dashed line is showing you your seam allowance because that's where you'll be sewing - 1/4" in from the solid line.

      ReplyDelete
    8. I would definitely love to take part in this quilt along :) But first I have to buy template plastic and fabrics (Could that work with a jelly roll and additional yardage).
      Bye
      Susanne

      ReplyDelete
    9. "You will cut on the solid line. The dashed line is showing you your seam allowance because that's where you'll be sewing - 1/4" in from the solid line." Are you sure you don't have that backwards? The dashed lines are on the outside. If you cut the solid you are cutting off the dashed! I thought you sew all solid lines, cut all dashed. I'm sooo confused now, lol

      ReplyDelete
    10. oops! I just started cutting melons and the dashed lines are on the inside...it all makes sense now, forget my post above please :)

      ReplyDelete
    11. To anyone else who bought Brendas' precut purple fabric set...which two fabrics did you decide to use for the corners?? I am terrible at choosing this kind of stuff.

      ReplyDelete
    12. Nice! I am going to have to save this because I have wanted to do one of these quilts for a while now!

      ReplyDelete
    13. I would love to make this quilt, but, where do I get the template patterns for the paper piecing arcs and the rest of the pieces; like the melons, etc...
      Thanks
      Janet

      ReplyDelete

    Related Posts Plugin for WordPress, Blogger...